November 24th through January 1st
All orders of $50 or more will receive FREE shipping and all orders of $100
or more will also receive a FREE set of EOD Daggers with Bonus ParaCord wrist
lanyard and all orders containing $100 or more of Midwest Industries products
will also receive a FREE Midwest Industries mouse pad and sticker.
Black will be the default color of daggers sent with orders, if you would
like the OD green or the FDE just let us know when you place your order.
Welcome to the Lonestar Tactical Solutions
 AR15 accessories page.
We carry a wide variety of parts and
AR accessories for your AR-15 rifles.
Check back often as our site is regularly updated
with new products. If you're looking for something
particular and don't see it please call and ask.
Be sure to

Lonestar Tactical Solutions
Also be sure to

Lonestar Tactical Solutions
YouTube Channel

ALG AR Advanced Combat Trigger $69.00
The ALG Defense Advanced Combat Trigger (ACT) is designed for those shooters
where tradition, value and regulatory concerns are of primary importance.
The pull of the ACT is very similar to a standard mil-spec trigger, however
it is sharper and the grittiness of the stock trigger pull has been removed
while the traditional reliability of a stock trigger remains. The pull weight
is not lower than the M4/M16 minimum weight specification of 5.5lbs.
Note: HardLubing is ALG's term for electroless Nickel plating with an
integral modifier to the base nickel plate. Either Boron or Teflon is used
to enhance surface hardness, wear resistance and corrosion resistance and
also create favorable tribological properties of the trigger components.
Testing has shown that differential coating of the trigger parts contributes
to the sharpness of the ACT's single stage pull. The trigger component is
plated with Nickel-Boron which has a high surface hardness combined with
excellent wear resistance. The color is a pleasing matte light grey that may
be painted on non-functional surfaces if the shooter so desires (such as the
trigger bow that is visible outside the lower receiver). The hammer,
disconnector and trigger/hammer pins are plated with Nickel-Teflon which
combines a low coefficient of friction with good wear resistance. The Teflon
impregnation colors the metal a mottled, greyish/green. Parts coated with
Nickel-Teflon cannot be painted. Both coatings are highly corrosion resistant
eliminating the oil seal of traditional phosphated firearm components.
1. Performance Advantages for the Shooter
  • The ALG Defense ACT trigger pull is smoother and sharper than a stock
    trigger. This is accomplished by polishing the sear surfaces smooth and
    HardLubing the trigger components.
  • Sear geometry has not been changed from the standard profile so the high
    reliability that the stock trigger is known for is unchanged.
  • Trigger and hammer are made from true 8620 alloy steel military
    specification castings, correctly carburized, quenched and tempered for
    high surface hardness.
  • Disconnector is 1070 High Carbon steel properly Austempered into the
    spring range of hardness.
  • Springs are corrosion resistant and meet military specifications.
  • A full force hammer spring is used for positive ignition of all type
    of ammunition.
  • Trigger and hammer pins are improved over stock mild steel by using
    4140 Chrome-Moly steel that has been quenched and tempered. Pins are
    centerless ground to a fine finish and a diameter 0.001” larger than
    stock to reduce play in the trigger assembly while retaining a slip fit
    into the weapon lower receiver. Both pins are Nickel-Teflon coated.
  • Pull weight is above the U.S. Military minimum pull weight of 5.5lbs
    but does not reach near the upper limit of 9.5lbs. Generally, the pull
    weight is about 6.0lbs.
    2. Advantages for the Armorer
  • The ALG Defense ACT trigger is an enhanced standard trigger so
    maintenance and installation procedures are unchanged.
  • Trigger assembly parts may be interchanged between triggers,
    there are no matched sets.
  • As a trigger meeting the essential U.S. Military trigger
    specifications for the M4 Carbine, the ALG Defense ACT can be
    substituted for lower performing stock triggers while still staying in
    compliance with Unit or Departmental requirements. Made in USA

    ALG AR15/M4 Mil-Spec Lower Parts Kit $49.00
    (no grip, no trigger)

    This Kit comes with:
    Bolt Catch, Bolt Catch Plunger, Bolt Catch Spring, Bolt Catch Roll Pin,
    Mag Release, Mag Release Button, Mag Release Spring, Buffer Retainer Spring,
    Safety, Buffer Retainer, Safety Detent Spring, Safety Detent, Trigger Guard,
    Trigger Guard Roll Pin, Takedown Detent Springs,Takedown Detents,Takedown Pins
    Made in USA

    ALG ACT AR15/M4 Mil-Spec Lower Parts Kit $118.00
    (with grip and ACT trigger)

    This kit comes with:
    Bolt Catch, Bolt Catch Plunger, Bolt Catch Spring, Bolt Catch Roll Pin,
    Mag Release, Mag Release Button, Mag Release Spring, Buffer Retainer Spring,
    Safety, Buffer Retainer, Safety Detent Spring, Safety Detent, Trigger Guard,
    Trigger Guard Roll Pin, Takedown Detent Springs,Takedown Detents,Takedown Pins,
    ACT Trigger, and standard AR pistol grip(not pictured). Made in USA.

    Midwest Industries AR15 Two Chamber Brake $44.95
    Large two chamber design reduces muzzle climb. Constructed from tool steel
    with a phosphate finish. 1/2-28 threads for 5.56/.223 rifles.
    Lifetime Warranty. 100% made in the USA

    Midwest Industries 308 Two Chamber Brake $44.95
    Large two chamber design reduces muzzle climb. Constructed from tool steel
    with a phosphate finish. 5/8-24 threads for .30 Cal rifles.
    Lifetime Warranty. 100% made in the USA

    Troy Ind. Ambidextrous Bolt Release $29.00
    The Ambidextrous Bolt Release is an indispensable device that easily
    releases or holds bolt open with one hand to streamline firearm clearing
    and reloading after a malfunction. By being ambidextrous, this bolt
    release eliminates hand changeovers improving control of rifle when in
    use. Made from hardened aircraft aluminum. Made in USA

    Troy Ind. Trigger Guard $25.00
    The Enhanced Trigger Guard allocates user with easy access to the trigger
    while wearing gloves and opens trigger area even in extreme conditions.
    With no sharp edges or corners, this trigger guard fills width gap on
    receivers. The Enhanced Trigger Guard is machined from hardened aircraft
    aluminum and rotates down like a standard trigger guard. Made in USA.

    Picatinny Rail for M16/M4/AR-15 $14.95
    Makes issue handguards capable of mounting Picatinny devices
    in 6 o-clock or 12 o-clock position. Designed with the correct
    angle to position devices parallel to the barrel. MIL-SPEC
    reinforced polymer. Designed for the M16/M4/AR-15, but, with
    small modifications, fits many other weapons. Made in Israel
    Weight 1.6 oz. (46 gr) Width .83" (21 mm)
    Height .63" (16 mm) Length 6.1" (155 mm)

    FAB Defense Carbine Rail $159.99
    Slim-profile, compact rail system with extended top rail to allow mounting
    of optics and accessories. Top rail is in line with the upper receiver rail,
    and extends back over the delta ring to allow mounting of optics across the
    entire top of weapon. Issued to Israeli Special Forces, Duvdevan, and Yamam.
    The NFR rail system firmly locks to the barrel nut so mounted optics retain zero.
    6" long. Drop-in installation. CNC machined hardcoated black anodized aviation-
    grade 6061 T6 aluminum. Made in Israel.
    Weight 10.34 oz (293 gr)Width 2.17 (55 mm)Height 3.15" (80 mm)

    Troy Ind. Tomahawk Stock $299.95
    A BattleAx for the 21st Century: the new TROY Tomahawk Stock. The Tomahawk is
    a modern, combat-tactical, PDW-style retractable stock with an integrated
    cheek piece that elevates 5.56/.300blk, making them powerful, compact and
    ultra lightweight. Utilizing a MIL-SPEC bolt carrier group, the Tomahawk
    Standard (5.56/7.62) shortens overall length by 2" compared to an M4 stock.
    The impact-resistant, polymer cheek-piece with QD swivel mount provides
    stability and comfort; the aluminum thumb-latch and guide rails offer
    superior strength and five positions of adjustment.
  • Retractable, multi-position, compact stock
  • Machine hardened aircraft aluminum rails & latch
  • Ultra lightweight polymer buttstock and continuous cheek piece
  • Only 10.4oz. (16.9oz with Spring and Buffer)
  • Available for 5.56/.300 and 7.62
  • Tomahawk Standard uses MIL-SPEC bolt carrier group
  • Tomahawk Short uses TROY proprietary buffer & bolt combo
  • Q.D. swivel hole for sling attachment
  • Available in Black, Tan and Flat Dark Earth
    Note: Not Compatable with TROY Ambidextrous Bolt Release
    Not Compatable with Primary Weapons Systems AR

    GL-MAG $114.95
    Survival Buttstock with built in MAG carrier. The GL-MAG incorporates
    an inconspicuos/sleek M4 magazine carrier. Holds all standard sized
    M4/AR-15 magazines. Unique inversed positioning lever incorporates
    a quick release button allowing swift mag release. Ambidextrous
    integrated attachment points for standard QD sling swivels. Fits
    perfectly on both Mil-Spec and commercial Tubes. Made from Mil-Spec
    reinforced polymer composite. Available in Black, Flat Dark Earth,
    and OD Green. FAB Defense Made in Israel.

    Troy's OEM M4 QD Sling Mount $45.00
    The Troy OEM M4 Sling Mount replaces the factory M4 carbine receiver
    end plate, incorporating ambidextrous quick detach swivel mounts.
    Includes heavy-duty quick detach push button swivel. Made from hardened
    aircraft aluminum with stainless steel push button. Made in U.S.A.

    AR15/M4 Dual Sling Adapter End Plate $14.95
    For use with any AR-15/M16/M4 with a collapsible buttstock
    Replace your Standard Issue Receiver End Plate to Enable Rear
    Receiver Sling Attachment Points. Provides two rear receiver
    sling loops enabling attachment of a tactical sling for left
    or right hand configuration. Easy installation - Simply remove
    and re-install your existing collapsible stock and buffer tube
    after replacing base plate. FAB Defense, Made in Israel.

    AR-15/M4/M16 Pistol Grip $24.95
    Purpose: A pistol grip that provides a better shooting angle, better control,
    less slipping and less wrist fatigue than other grips. Features: Finger swelts
    and a backstrap shape designed to enhance grip, even when wet. Extended
    beavertail for better control by allowing higher firmer hold. Storage area with
    hinged door. MIL-SPEC reinforced polymer composite.Available in black, FDE, OD
    Green. FAB Defense Made in Israel.

    AR-15/M4/M16 Rubberized Pistol Grip $34.95
    Featuring State-of-the Art Multi-Textured rubber, enhancing your grip
    experience. Incorporated into it's design, is the superior contour
    adding even more comfort and proper ventilation needed in extreme heat
    and moist environments, giving you the edge you need in the field or
    the range. Advantages: MIL-SPEC Reinforced Polymer Composite with
    Muti-Textured Rubber Overmold Superior Coating. Three Different Rubber
    Overmolded Style Textures; Rib Studded at Palm, Alligator Pattern for
    front Fingers and Moon Surface Textured Sides. Multi Rubber Texture Provides
    Superior Comfort; Adds Appropriate Ventilation, Prevents Slip and Reduces
    Sweaty Palms. Finger Swelts and a Backstrap Shape Design Provides Enhanced
    Grip, Even when Wet. Extended Beavertail for Better Control, Allowing a
    Higher Firmer Hold. Readily Accessible Storage Area with Securely Sealed
    Hinged Door. Available in black, FDE, OD Green. FAB Defense Made in Israel

    M16/AR15 Polymer 30 rd 5.56x45mm/.223 Magazine $24.95
    Call to order

    The Ultimag 30R is a 30-round 5.56x45 NATO (.223 Remington)
    polymer magazine for AR15/M4 compatible weapons, with transparent
    windows for rapid visual confirmation of remaining rounds. The
    Ultimag 30R is made to provide a strong, durable, and reliable
    magazine solution using high-grade materials.
  • Multi-textured gripping surface for secure grip when handling the magazine
  • Unique floor plate for versatile coupling options
  • Disassembled by hand, no tools needed
  • Long-lasting stainless steel cataphoresis-coated spring
    for ideal corrosion protection
  • Hybrid AK style spring design prevents tilt or binding
  • Unique internal design for smoother, more reliable feeding
  • Low friction follower for increased reliability
  • Durable, light weight, impact and crush resistant,
    reinforced polymer construction
  • Long-lasting spring design for extended loaded storage duration
  • Translucent round-count windows on both sides combined with an
    indicative follower for rapid visual identification of remaining
    rounds from 10 to 30
  • Extended floorplate for improved magazine handling
    with gloves and gear
  • Compatible with double and triple mag pouches
  • Over-travel protection, stops on the follower
  • Compatibility:
    5.56x45 NATO and .223 Rem M16/M4/AR15 variants
    Manufactured by FAB Defense in Israel
    Weight 6.1 oz (174 gr) Width .9" (23 mm)
    Height 7.6" (193 mm) Length 2.8" (72 mm)

    Troy M16/AR15 BattleMag 30rd $15.00
    Call to order

    The Troy BattleMag is engineered to function flawlessly with all M4,
    M16/AR15, HK416 and FN SCAR rifles and carbines. An aggressive scale
    pattern provides the ultimate magazine grip in dirty or wet conditions.
    A bolstered floor plate is set flush to eliminate the BattleMag from
    catching on other magazines or creating unnecessary bulk when stacked or
    pulled from a pouch. The reinforced feed lips and anti-tilt follower do
    not require a clamp to keep the feed lips from spreading when kept loaded
    for extended periods of time. Made from improved Troy proprietary
    military-grade, chemical, biological and impact resistant polymer and
    extensively tested by Special Ops units, the Troy BattleMag outperforms
    all other polymer magazines in functionality and reliability. Includes a
    flush and shock absorbing extended floor plate lock, a $5 value.

    M16/AR15 Steel 30 rd 5.56x45mm/.223 Magazine $18.95
    Call to order

    E-LANDER MAGS are high-performance durable steel magazines.
    30 round steel magazines for AR-15/M16/M4 rifles. Made in
    Israel, they were tested by special military forces and
    anti-terror units. These magazines have proven to withstand
    severe combat conditions and requirements. Backed by over
    six decades of experience the company has specialized in
    the manufacturing of precision-stamped metal parts and
    tools with an uncompromising commitment to quality and reliability.
  • High performance steel body - strong heavy-gauge steel
  • Tested by special military forces and anti-terror units
  • Fine resistance body coating, enduring up to 97 hours
    salt-spay test. This exceeds the military salt-spay test requirements
  • State -of-the-art anti-tilt self-leveling followers
  • Impoved reinforced floorplate

  • Colors
    M16/AR15 Magazine Well Grip $24.95
    The original Magwell Grip! Often imitated, never rivaled!
    The MWG converts the magazine well into a comfortable vertical
    grip for better control of the weapon. Allows a tight stance
    for speed and maneuverbility. Prevents pressure on non-free-
    floating handguards that can affect accuracy. Keeps hands off
    the magazine. The MWG also funtions as a flared and extended
    magazine well to speed reloads. Has a window to view your
    serial number through. Fits MIL_SPEC M16, M4, and AR-15 lowers.
    The MWG is also legal on AR pistols. FAB Defense, Made in Israel

    M16/AR15 Front Grip and Magazine Holder $39.95
    Enables carry of spare magazine, ready to use, on the weapon,
    while serving as ergonomic foregrip. Quick release with backup
    locking screw. button similar to the AR-15/M16 magazine release
    quickly releases spare magazine. FAB Defense, Made in Israel

    Adjustable Polymer Ejection Port Cover for M16/M4/AR-15 $9.95
    Rustproof polymer ejection port cover with adjustable tension
    to replace covers that will no longer stay closed on worn receivers,
    or to prevent wear on new receivers. Will not rust, deform, or damage
    ejection port. Instead of replacing a worn upper receiver, just replace
    the ejection port cover. Less than half the weight of the original
    Weight 0.2 ounces (6 gr) Width 0.3" (8 mm)
    Height 0.9" (23 mm) Length 3.15" (80 mm)

    AR Recoil Buffer $10.95
  • Reduces recoil and muzzle climb more than OEM buffer.

  • Provides graduated deceleration.

  • Will fit semi and select fire models AR-15 and M-16.

  • Field tested in Afghanistan by US Army and Special Forces.

  • Made in USA

  • Noise and Movement Eliminator for M16/M4/AR-15 $0.95
    Eliminates gap between upper and lower receiver. Reduces noise while
    improving stability. Cost-effective solution for worn receivers.
    Prevents wear to new receivers. Made in Israel
    Weight 0.07 ounces (2 gr) Width 0.5" (13 mm)
    Height 0.7" (18 mm) Length 0.55" (14 mm)

    AR15 Micro Tool $19.99
    The last thing anyone wants is to get to the range and have a glitch keep
    your AR from running smoothly. The AR15 Micro Tool’s sturdy stainless steel
    frame contains tools to help you adjust sights, tear down the AR, and scrape
    carbon from the bolt carrier group. This little wonder can save the day.
  • Key ring with strap
  • Bolt tail scraper
  • Firing pin scrapers
  • Wrenches: 3/8", 5/16", 1/4", 3/16", 1/8"
  • 5mm bit driver
  • Flathead screwdriver
  • Front sight adjuster
  • Bolt face scraper/screwdriver
  • Bottle opener
  • Cutter
  • Pin punch
  • Carabiner

    AR15 Scraper $19.99
    The AR15 Scraper is designed to speed clean the bolt carrier group of the
    AR15. It’s precision made from unhardened stainless steel and weighs just
    AR15 Scraper speed-cleans 12 critical surfaces
  • Inside boat tail
  • Bolt tail shoulder
  • Bolt waist
  • Behind cartridge extractor
  • Small diameter of firing pin
  • Large diameter of firing pin
  • Bolt face
  • Bolt tail
  • Bolt lugs
  • Bolt cam pin
  • 2 surfaces inside bolt carrier
  • 1/4" bit driver

    AR15 Cleaning Kit $29.99
    The Gun Boss AR15 cleaning kit weighs just 11 ounces. Rod, brushes, picks,
    slotted tip and additional accessories all fit into a rugged, weatherproof,
    zippered case with a digital camouflage exterior. Internal trays hold
    cleaning tools securely, so there’s no rattling.
  • 5.56 /.223 brass brush, phosphor bronze bristles
  • Six coated, threaded rod sections
  • Steel and phosphor bronze chamber brush
  • Nylon, slotted tip
  • Straight and angled metal cleaning picks
  • Bore illuminator/pin punch/safe chamber indicator
  • Bolt carrier brush threaded to accept cleaning rod
  • 5 star chamber cleaning pads
  • 5 pipe cleaners for bolt carrier key, gas tubes
  • 25 synthetic cleaning patches
  • T-handle
  • EVA-molded case
  • No-rattle accessory trays

    AR15 Smart Mat $19.99
    What makes this mat so smart? It was built by AR owners for AR owners.
    It's large enough to handle a field-stripped AR15 with the visible
    instructions to get you there. The attached parts tray ensures your pins,
    bolts and springs are never lost again. Its oil-resistant surface allow
    you to properly clean your gun without ruining the kitchen table.
    The AR15 Smart Mat is everything your greasy towels are not.
    Maybe Smart Mat is an understatement.

    AR15 Field Guide $9.99
    The AR15 Field Guide is a lightweight, pocket-sized, go-anywhere reference
    guide for maintaining an AR15. Color-coded, illustrated instructions
    provide step-by-step instructions for disassembling, scraping, cleaning
    and lubricating an AR15. Pages are coated to resist solvents and oils.
    Using only these maintenance instructions, an AR15 can remain in service
    for the life of the firearm.
  • Step-by-step disassembly instructions
  • Scraping build-up from 12 bolt carrier group surfaces
  • Simple cleaning instructions
  • Heavy, light, minimal lubrication points